Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 20)

14
Bedside Unit
The Bedside Unit shows system status, displays the heart rate, respiration rate, movement
level, patient turns and bed exit data, and allows system configuration.
1. Alert indicator key that can be
pressed as a response to an active
alert
2. On/Off
3. Suspend alerts for 15 minutes
4. Download reports
5. Speaker/ buzzer
Figure 5: Bedside Unit Indicators and Keys
Bedside Unit Controls and Indicators
The Bedside Unit contains the following controls and indicators:
1. Alert indicator key - the light will flash red in case of red alerts (e.g. heart rate,
respiration rate and bed exit), yellow in case of yellow alerts (movement and patient turn
reminder) and blue in case of technical alerts. While an alert is active, alert light key can
be pressed to respond to the alert.
2. ON-OFF button. Use the button to switch the bedside unit ON or OFF.
3. 15 min Suspend Key – Pressing it will disable the red and yellow alerts for 15 minutes.
No red or yellow alert will be given by the EarlySense System during the next 15
1
2
3
4
5