Mercedes-Benz CL-Class 2014 COMAND Manual - Manual (Page 59)

X To switch reverse gear activation on/
off: press the W function button.
The system menu appears.
X Select Settings by turning cVd the
COMAND controller and press W to
confirm.
X Select 360° Camera and press W to
confirm.
X Select Activation by R gear and press
W to confirm.
The function is switched on O or off ª,
depending on the previous status.
i You need only switch this function on if
you want the 360° camera image to be
displayed when you engage reverse gear.
The other activation options are always
available as well.
X To display the 360° camera image:
press the W function button for at least
2 seconds.
The full-screen display appears.
or
X Select Settings by turning cVd the
COMAND controller and press W to
confirm.
X Select 360° Camera and press W to
confirm.
The 360° camera image appears in split-
screen mode.
or
X Engage reverse gear (only possible if the
Activation by R gear option is
activated)
The 360° camera split-screen image with
backing up image appears.
For a detailed description of the 360°
camera, see the separate vehicle Operator's
Manual.
360° camera
57
Vehicle
functions