Navigation, Map operation and map settings – Mercedes-Benz CL-Class 2014 COMAND Manual User Manual
Page 113

X
Select
Default Symbols
,
Custom
Symbols
or
No Symbols
.
If you select
Custom Symbols
, the POI list
appears.
X
To switch the symbol display on/off:
select a POI by turning cVd the COMAND
controller and press W to confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª. You can switch on the symbol
displays for more than one point of interest.
X
To switch all personal symbols on/off:
select
All
and press W to confirm.
Depending on the previous status of the
symbols, they will either be shown O or
hidden ª.
If the function is switched on O, the
individual POIs are grayed out and the
previously selected settings remain
unchanged.
If the function is switched off ª, you can
reselect the individual POIs. They show the
most recently selected settings.
i
The list shows all symbols that are
contained on the digital map across all
countries. However, not all points of
interest are available in all countries. As a
result, certain point of interest symbols
may not be displayed on the map, even if
the symbol display is switched on.
X
To exit the menu: press the k back
button.
Selecting map information
Map information in the display
During route guidance, you can have map
information shown at the bottom edge of the
display.
X
To show the menu: press W the COMAND
controller.
X
Select
Navi
in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Select
Map Settings
and press W to
confirm.
The map settings menu appears.
X
Select
Text Information On Map
and
press W to confirm.
A # dot indicates the current setting.
X
Select
Current Street
,
Geo-
coordinates
or
None
and press W to
confirm.
X
To exit the menu: slide XVY the COMAND
controller.
Road display
:
Road names or numbers, e.g. for
highways
Geo-coordinate display
:
Current height above average sea level
(rounded to the nearest 10 m)
;
Current vehicle position: latitude
coordinates
Map operation and map settings
111
Navigation
Z