Mercedes-Benz CL-Class 2014 COMAND Manual - Manual (Page 57)

X Turn cVd or slide ZVÆ the COMAND
controller and press W to confirm.
The massage function runs for
approximately 15 to 25 minutes,
depending on the setting.
X To exit the menu: press the k back
button.
Adjusting the driving dynamics
This function is available on vehicle model
series with a dynamic multicontour seat.
X Select the seat (
Y
page 52).
X Select Dynamic Seat by turning cVd the
COMAND controller and press W to
confirm.
A scale appears.
You can select:
R 0 : Off
R 1 : level 1 (medium setting)
R 2 : level 2 (high setting)
X Turn cVd or slide ZVÆ the COMAND
controller and press W to confirm.
X To exit the menu: press the k back
button.
Resetting all adjustments
X Select the seat (
Y
page 52).
X Select Reset All by turning cVd the
COMAND controller and press W to
confirm.
A prompt appears.
X Select Yes or No and press W to confirm.
If you select No , the process will be
canceled.
After you select
Yes , all seat adjustments
are reset to the default values (factory
setting).
Rear view camera
The rear view camera is only an aid. It is not
a replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering and
parking. When maneuvering or parking, make
sure that there are no persons, animals or
objects in the area in which you are
maneuvering.
The image from the rear view camera is
shown in the COMAND display when reverse
gear is engaged if:
R your vehicle is equipped with a rear view
camera.
R COMAND is switched on
R the Activation by R gear function is
activated.
If the function is activated, the COMAND
display will automatically switch back to the
Rear view camera
55
Vehicle
functions