Mercedes-Benz CL-Class 2014 COMAND Manual - Manual (Page 258)

remote control and press the 9 button to
execute it.
A menu appears and the first entry,
Select , is highlighted.
X Press the 9 button.
Operation with an active COMAND
source
Switching the function on/off in
COMAND
You can transfer an audio or video source
selected in COMAND to the Rear Seat
Entertainment System. If you subsequently
switch modes in COMAND, the new source
will not be transmitted to the Rear Seat
Entertainment System.
X
To switch on the function in COMAND:
switch to the desired audio mode in
COMAND, e.g. CD mode (
Y
page 197), or
show the menu in video DVD mode
(
Y
page 230).
X Select the menu item at the bottom left,
e.g. CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
X Select Active Aud./Vid. Source For
Rear and press W to confirm.
In the status bar at the top, you will see the
headphones icon and the _ icon for the
source that has been switched on.
X To switch off the function in COMAND:
switch to the desired audio mode in
COMAND or show the menu in video DVD
mode.
X Select the menu item at the bottom left,
e.g. CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
X Select Rear Audio/Video Off _ and
press W the COMAND controller to
confirm.
Selecting an active COMAND source
on the rear-compartment screen
Loading the active COMAND source
256
Operation with an active COMAND source
Rear
Seat
Entert
ainment
System