At a glance, Basic comand functions – Mercedes-Benz CL-Class 2014 COMAND Manual User Manual
Page 34
harman/kardon
®
Logic 7
®
Surround
Sound system
The example describes how to set the
surround sound for radio mode.
X
To switch surround sound on/off: press
the $ button.
The radio display appears. You will hear the
last station played on the last waveband.
X
Select
Sound
by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Select
surround
and press W to confirm.
X
Select
Logic7
®
On
or
Logic7
®
Off
by
turning cVd the COMAND controller and
press W to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.
X
To exit the menu without saving: press
the k back button or slide XVY the
COMAND controller.
i
Please note the following: for the
optimum audio experience for all
passengers when Logic7
®
is switched on,
the balance should be set to the center of
the vehicle interior.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround sound playback does not
function for mono signal sources, such as
for AM radio mode.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic7
®
, since it may
otherwise switch dynamically between
stereo and mono and cause temporary
sound distortions.
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
i
The
Logic7
®
On
function creates a
surround sound experience for every
passenger when playing stereo recordings,
for example. It enables optimum playback
of music and films on CD, audio DVD or
video DVD with multichannel audio
formats, such as MLP, dts or Dolby Digital.
This results in sound characteristics like
those intended by the sound engineer
when the original was recorded.
i
If you select
Logic7
®
Off
, the sound
system plays the tracks as stored on the
medium. Due to the design of the
passenger compartment, an optimum
audio experience cannot be guaranteed for
all passengers.
32
Basic COMAND functions
At
a
glance