2 advancedtca and amc commands, Advancedtca and amc commands – Kontron AM4024e User Manual
Page 79
D R A F T — F O R I N
T E R N A L U S E O N L Y
79
www.kontron.com
User Guide
AM4024(E)
10.3.2 AdvancedTCA and AMC Commands
The following table shows an excerpt from the command list specified in the PICMG 3.0 R 2.0 Ad-
vancedTCA Base Specification and the PICMG AMC.0 Advanced Mezzanine Card Specification, R 1.0. The
shaded table cells indicate commands not supported by the IPMI firmware.
M = mandatory
[1] Only “FRU Control - Cold Reset” and “FRU Control Quiesce” are supported.
Table 52: AdvancedTCA and AMC Commands
COMMAND
SPEC. TABLE
NETFN
CMD
KONTRON SUPPORT
ON MMC
AdvancedTCA
PICMG 3.0 TABLE
M
Get PICMG Properties
3-9
PICMG
00h
M / Yes
FRU Control
3-22
PICMG
04h
M / Yes [1]
Get FRU LED Properties
3-29
PICMG
05h
M / Yes
Get LED Color Capabilities
3-25
PICMG
06h
M / Yes
Set FRU LED State
3-26
PICMG
07h
M / Yes
Get FRU LED State
3-27
PICMG
08h
M / Yes
Get Device Locator Record ID
3-29
PICMG
0Dh
M / Yes
AMC
AMC.0 TABLE
O
Set AMC Port State
3-27
PICMG
19h
O / Yes
Get AMC Port State
3-28
PICMG
1Ah
O / Yes
Set Clock State
3-44
PICMG
2Ch
O / Yes
Get Clock State
3-45
PICMG
2Dh
O / Yes