Kontron AM4024e - Manual (Page 68)

D R A F T — F O R I N
T E R N A L U S E O N L Y
68 www.kontron.com
User Guide
AM4024(E)
9.2.3.1 Remember the Password
It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords may
lead to being completely locked out of the system.
If the system cannot be booted because neither the User Password nor the Supervisor Password are
known, refer to the Chapter 3.1, DIP Switch Configuration, for information about clearing the uEFI
BIOS settings, or contact Kontron for further assistance.
Note: The HDD security passwords cannot be cleared using the above method.
9.2.4 Boot Setup Menu
The Boot Setup menu lists the for boot device priority order, which is dynamically generated.
9.2.5 Exit Setup Menu
The Exit Setup menu provides functions for handling changes made to the uEFI BIOS settings and the
exiting of the Setup program.
Table 48: Boot Priority Order
FUNCTION DESCRIPTION
Boot Priority Order 1. Internal Shell Keys used to view or configure devices:
<
 >  and <  > arrows select a device.
<+> and <-> move the device up or down.
enables or disables a device.
deletes an unprotected device.
2. USB FDD:
3. USB CD:
4. ATAPI CD:
5. USB HDD:
6. ATA HDD0:
7. ATA HDD1:
8. ATA HDD2:
9. ATA HDD3:
10. ATA HDD4:
11. ATA HDD5:
12. Other HDD:
13. PCI LAN:
Table 49: Exit Setup Menu Functions
FUNCTION DESCRIPTION
Exit Saving Changes Equal to F10, save all changes of all menus, then exit the uEFI BIOS Setup. Finally,
resets the system automatically.
Exit Discarding Changes Never save changes, then exit the uEFI BIOS Setup.
Load Setup Defaults Equal to F9. Load standard default values.
Discard Changes Load the original value of this boot time, not the default Setup value.
Save Changes Save all changes of all menus, but do not reset system.