Kontron pITX-SP - Manual (Page 12)

KTD-S0002-I Page 7 Specifications
p ITX-SP User's Guide
3.3 Mechanical Specifications
Dimensions
³
Pico-ITX TM form factor 100 x 72 mm ±0.2 mm (complete with all connectors 104 x 78 mm)
³
Height approx. 26 mm
3.4 Electrical Specifications
Supply Voltage
³
+5V DC ±5%
Supply Voltage Ripple
³
Maximum 100mV peak to peak 0 – 20 MHz
Supply Current (DOS prompt)
Power consumption tests were executed during the DOS prompt with 1 GB DDR2 SDRAM, DVI monitor, USB
keyboard and CF-card or USB key (standard variant) as boot device (default BIOS settings).
CPU clock 1.1 GHz (article number 03001-0000-11-1 and 03001-0000-11-2)
Variant: Standard Variant: Basic
Full Load Soft Off S5 Full Load Soft Off S5
[A] [W] [A] [W] [A] [W] [A] [W]
tbd. tbd. tbd. tbd. 1.10 5.50 0.08 0.40
CPU clock 1.6 GHz (article number 03001-0000-16-0 and 03001-0000-16-2)
Variant: Plus Variant: Standard
Full Load Soft Off S5 Full Load Soft Off S5
[A] [W] [A] [W] [A] [W] [A] [W]
1.70 8.50 0.08 0.40 1.50 7.50 0.08 0.40
Supply Current (Windows ® XP SP3)
The power consumption tests were executed during Windows ® XP SP3 by using a tool to stress the CPU
(100% load) and extensive 3D graphic. The boards were ran with 1 GB DDR2 SDRAM, DVI monitor, USB key-
board & mouse and a CF-card or S-ATA harddisk (standard variant) as boot device (default BIOS settings).
Note: CPU clock 1.6 GHz with additional active cooler.