Vmod-2/vmod-2d, Configuration – Kontron VMOD-2D User Manual
Page 58
VMOD-2/VMOD-2D
12/15/97
Configuration
Page 3 - 3
Man. ID 03139, Rev. Index 0200
However, you are strongly recommended to check these delivered settings against the func-
tion set (your piggyback's needs) you require, in order to ensure that the VMOD-2 and your
system will function correctly.
Table 3-1: General Overview of the VMOD-2 Jumpers
Jumper
Number
Default
Setting
Brief Functional Description
See Ch.
#
B01
Open*
Interrupt vectors generated by PB's
3.1.1 & 4
B02
Set
Selects Address line A15's decoding to
"0"
3.1.2
B03
Open
Standard Access 39/3D/00
3.1.3
B04
Open
Bit D7 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B05
Open
Bit D6 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B06
Open
Bit D5 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B07
Open
Bit D4 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B08
Open
Bit D3 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B09
Open
Bit D2 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B10
Open
Bit D1 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4
B11
Open*
Bit D0 of VMOD-2's Interrupt vector set
to logical "1"
3.1.4 & 5
B12
Set
Selects Address line A14's decoding to
"0"
3.1.2
B13
Open
Selects Address line A13's decoding to
"1"
3.1.2
B14
Set
Selects Address line A12's decoding to
"0"
3.1.2
B15
Set
Selects Address line A11's decoding to
"0"
3.1.2
B16
Open
Address width selected for 256 Bytes.
3.1.6