Vmod-2/vmod-2d, Product overview – Kontron VMOD-2D User Manual
Page 16

VMOD-2/VMOD-2D
12/15/97
Product Overview
Page 1 - 6
Man. ID 03139, Rev. Index 0200
VMOD to Piggyback
Connectors (User
side)
A double-row (to/from user I/O side) set of connec-
tors per piggyback location. These connectors are
galvanically isolated for 2.5 kV (not on index 00
however) from the rest of the VMOD-2 circuits and
are selected to their respective function according
to actual piggyback(s) fitted.
VMEbus Connector
DIN 41612 style C, 96-pin
Front Panel Width
4 TE (20.3 mm)(1 slot)
Front Panel Connec-
tor
50-pin male ribbon cable header with retain/eject
latches. Alternatively, no front connector, but a 50-
pin on-board header (without retain/eject latches
where interfaces are to be kept internal to rack/
equipment.
Piggybacks General
See respective piggyback's manual for exact speci-
fications.
Piggyback Size
Width:
48 mm(1 7/8 inches)
Length:
100 mm(3 15/16 inches)
Depth:
12 mm
(1/2 inch)
Mechanical/Electri-
cal Interface
Held by either Two sets of twin row header pins, or
a triple-row and double-row set of headers, provid-
ing all necessary communication paths and a
mechanical mounting method.
Temperature Range:
- Operating
- Storage
- 0° to +70° C (standard)
- -40° to +85° (extended, for some piggybacks)
- typically -55° to +85° C
Table 1-3: VMOD-2 Specifications
VMOD-2
Specification