Kontron VMOD-2D - Manual (Page 42)

VMOD-2/VMOD-2D
12/15/97
Functional Description
Page 2 - 16 Man. ID 03139, Rev. Index 0200
Caution!
The term "ST2" on the schematics at the back of any piggyback manuals,
refer only to the ST-2 connector of the actual piggyback (which plugs into
the above BU2) not to the VMOD-2's ST2. Take care not to confuse these
when making connections to your VMOD-2 front panel.
Remember also that the pin-outs change when swapping the previously
fitted piggybacks around or replacing them with different types. This is
also true when moving several differently configured VMOD-2's around in
your VMEbus system, where the external appearance of one VMOD-2 is
indistinguishable from any other.
Please refer to respective piggybacks user's manual for the exact pin-outs
which are presented to the external equipment (the VMOD's 50-way
header) when such a piggyback is fitted.