Craftsman 113.299210 - Manual (Page 15)

8 insert a 1/4-20 x 1 truss head screw through bottom
hoie in the bracket, and through the first hoie in the
right hand extension. Install a fockwasher and nut on
the screw Hand tighten the nut,
NOTE: When saw is upside down, right hand extension
is on the left side when facing front of saw
9 Insert a 1/4-20 x 1 truss head screw through bottom
hole in the other bracket and the fourth hols of the
extension Install a iockwasher and nut on the screw
Hand tighten the nut
Installing Rip Fence Guide Bars and Switch
Box
1, From the bag labeled “Guide Bars” remove the fol­
lowing hardware:
*3 Hex Head Screws, 5/16-18 X 1-1/2
*3 Hex Head Screws, 5/16-18 x 1
*6 Hex Jam Nuts, 5/16-18
*4 Flat Washers, 21/64 x 5/8 x 1/16
*3 Spacers, 3/4 dia. x 1/2 long
*6 Lockwashers, 5/16 Externa! Type
From the bag labeled "Misceiianeous'' remove only the
foilowing hardware:
*2 Hex Head Screws, 5/16-18 X 3/4
'2 Hex Jam Nuts, S/16-18
*■ 4 Lockwashers, 5/16 External Type
From among the loose parts find the following;
1 Front Guide Bar
1 Rear Guide Bar
Items marked with asterisk {*) are shown actual size
5/16-18 X 3/4
Hex Hd„ Screw 5/16 In. External
Lockwashers
5/16 In.
Hex Jam Nut
5/16-18 X 1-1/2 In
Hex Hd. Screw
5/16-18
X
1 in.
Hex Hd. Screw
21/64 In.
Washer