Dell PowerVault 735N (Rackmount NAS Appliance) - Manual (Page 103)

support.dell.com Jumpers, Switches, and Connectors A-3
Figure A-1. System Board Jumpers
Table A-1. System-Board Jumper Settings
Jumper Setting Description
PASSWD (default) The password feature is enabled.
The password feature is disabled.
ISA_CLR (default) The configuration settings are retained
at system boot.
The configuration settings are cleared at
next system boot. (If the configuration
settings become corrupted to the point
where the system will not boot, install
the jumper plug and boot the system.
Remove the jumper before restoring the
configuration information.)
87MPGbk0.book Page 3 Wednesday, December 13, 2000 2:14 PM