Dell PowerVault NX3000 - Manual (Page 99)

Installing System Components
99
Removing the Fan Bracket
WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System."
3 Optional: Remove the fans from the fan bracket. See "Removing a Cooling
Fan."
4 Lift the release latches on each end of the fan bracket and lift the bracket
out of the system. See Figure 3-14.
Figure 3-14. Removing and Installing the Processor Fan Bracket
1 fan bracket 2 release latch
3 fan connector on system board 4 mounting pin
2
1
4
3