Dell PowerVault NX3000 - Manual (Page 29)

About Your System
29
E1711 PCI parity
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCI parity error
on a component that
resides in PCI
configuration space at bus
##, device ##, function
##. Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards."
PCI parity
error on Slot
#. Review &
clear SEL.
The system BIOS has
reported a PCI parity error
on a component that
resides in the specified slot. Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards."
E1712 PCI system
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCI system error
on a component that
resides in PCI
configuration space at bus
##, device ##, function
##. Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards."
PCI system
error on Slot
#. Review &
clear SEL.
The system BIOS has
reported a PCI system error
on a component that
resides in the specified slot. Reinstall the expansion-
card riser. See "Expansion
Cards and Expansion-
Card Risers." If the
problem persists, the riser
card or system board is
faulty. See "Getting Help."
E1714 Unknown
error. Review
& clear SEL.
The system BIOS has
determined there has been
an error in the system, but
is unable to determine its
origin. Check the SEL for more
information and then
clear the SEL. Remove
AC power to the system
for 10 seconds and restart
the system.
If the problem persists,
see "Getting Help."
Table 1-1. LCD Status Messages (continued)
Code Text Cause Corrective Actions