Dell PowerVault NX3000 - Manual (Page 95)

Installing System Components
95
Figure 3-11. Removing or Installing a NIC Hardware Key
5 Close the system. See "Closing the System."
6 Reconnect the system to the electrical outlet and turn on the system and
attached peripherals.
Cooling Shroud
The system provides a cooling shroud that directs airflow from the cooling
fans over the system processor(s) and memory module(s).
WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
WARNING:
The memory modules are hot to the touch for some time after the
system has been powered down. Allow the memory modules to cool before
handling them.
CAUTION:
Never operate your system with the cooling shroud removed.
Overheating of the system can develop quickly resulting in a shutdown of the
system and the loss of data.
1 NIC hardware key 2 ISCSI_KEY connector
1
2