Dell POWEREDGE M1000E - Manual (Page 83)

Fabric Watch Administrator’s Guide 63
53-1002752-01
portThConfig command procedures
7
Signal loss Monitors the
number of signal
loss errors. Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0 Below: 0
Above: 0 Informative
Out_of_range
Sync loss Monitors the
number of loss of
synchronization
errors. Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50 Below: 0
Above: 0 Informative
Out_of_range
Packet loss (VE_Port
only) The number of
packets routed
through a port
exceeds the port
bandwidth. Unit: Errors
Time Base: minute
Low: 0
High: 100
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Protocol errors (PE) Monitors the
number of primitive
sequence errors. Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0 Below: 0
Above: 0 Informative
Out_of_range
Received packets
(RXP) Monitors the receive
rate, by percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0 Below: 0
Above: 0 Informative
Informative
State changes (ST) Monitors state
changes. Unit: Changes
Time Base: minute
Low: 0
High: 50
Buffer: 0 Below: 0
Above: 0 Informative
Out_of_range
Transmitted packets
(TXP) Monitors the
transmit rate, by
percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Trunk utilization The percent of
utilization for the
trunk at the time of
the last poll. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0 Below: 0
Above: 0 Informative
Informative
TABLE 17 E_Port class default settings (Continued)
Area Description Default threshold
settings Default alarm settings Threshold state