Dell POWEREDGE M1000E - Manual (Page 59)

Fabric Watch Administrator’s Guide 39
53-1002752-01
Fabric monitoring guidelines and default settings
6
Fabric class default settings
Table 4 provides default settings for areas in the Fabric class.
TABLE 4 Fabric class default settings
Area Description Default threshold settings Default alarm
settings
Threshold state
Domain ID changes Monitors forcible
DOMAIN ID changes Unit: D_ID Changes
Time Base: none
Low: 0
High: 0
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Loss of E_Port Monitors E_Port and
VE_Port status Unit: Downs
Time Base: none
Low: 0
High: 0
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Fabric logins (FLOGI) Monitors host device
fabric logins Unit: Logins
Time Base: none
Low: 0
High: 0
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Fabric reconfiguration Monitors
configuration
changes Unit: Reconfigs
Time Base: none
Low: 0
High: 0
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Segmentation changes Monitors
segmentation
changes
Unit: Segmentations
Time Base: none
Low: 0
High: 0
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Zoning changes Monitors changes to
currently-enabled
zoning configurations Unit: Zone changes
Time Base: none
Low:0
High:0
Buffer: 0 Below:0
Above: 0 Informative
Informative