Dell POWEREDGE M1000E - Manual (Page 119)

Fabric Watch Administrator’s Guide 99
53-1002752-01
Switch Health report
10
2/12 LB 100 0 0 0
2/13 LB 100 0 0 0
2/14 U 0 0 0 100
2/15 LB 100 0 0 0
3/0 T 100 0 0 0
3/1 U 0 0 0 100
3/2 U 0 0 0 100
3/3 U 0 0 0 100
3/4 U 0 0 0 100
3/5 U 0 0 0 100
3/6 U 0 0 0 100
3/7 U 0 0 0 100
3/8 U 0 0 0 100
3/9 U 0 0 0 100
3/10 VE 100 0 0 0
Switch Health report
The Switch Health report lists the following information:
• Current health of each port, based on the currently-configured policy settings.
• High-level state of the switch, the power supplies and temperature monitor.
• All ports that are in an abnormal state and the current health state of each port.
The switch health report is available even without Fabric Watch, but for licensed Fabric Watch
users, the marginal and faulty ports are included in the report. The following is an example of a
switch health report.
NOTE
Switch health report details do not display the health status of GbE ports. Fabric Watch only
monitors and reports the status for physical and virtual FC ports.
Generating a Switch Health report
1. Connect to the switch and log in as admin.
2. Enter the switchStatusShow command to generate a Switch Health report.
switch: admin
Password:
admin> switchstatusshow
Switch Health Report Report time: 03/09/2011 04:54:45 PM
Switch Name: Sat 240
IP address: 1080::8:800:200C:417A
SwitchState: HEALTHY
Duration: 01:10
All ports are healthy
Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY
Error ports monitor HEALTHY