Dell POWEREDGE M1000E - Manual (Page 61)

Fabric Watch Administrator’s Guide 41
53-1002752-01
Security monitoring guidelines and default settings
6
Security monitoring default settings
Use the Security class default settings shown in Table 6 for area and notification configuration.
There is no reason to alter the default settings.
TABLE 6 Security class area default settings
Area Description Default threshold settings Default alarm
settings
Threshold state
DCC violations (DV) Monitors DCC
violations Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
HTTP violations (HV) Monitors HTTP
violations Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
Illegal commands (IV) Monitors illegal
commands Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
Incompatible security
DB (ISB) Monitors
incompatible security
databases Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
Login violations (LV) Monitors login
violations Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
Invalid Certifications
(IC) Monitors invalid
certifications Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
No-FCS (NF) Monitors No FCS
violations Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Out_of_range
SCC violations (SV) Monitors SCC
violations Unit: Violations
Time Base: minute
Low: 1
High: 2
Buffer: 0 Below: 0
Above: 3 Informative
Informative
Out_of_range
In_range