Dell POWEREDGE M1000E - Manual (Page 32)

12 Fabric Watch Administrator’s Guide
53-1002752-01
Fabric Watch support in Access Gateway mode
1
Time bases specify the time interval between two samples to be compared. You can set the time
base to day (samples are compared once a day), hour (samples are compared once an hour), or
minute (samples are compared every minute). Second samples are not advisable. This
configurable field affects the comparison of sensor-based data with user-defined threshold values.
See “Time bases” on page 16 for more information.
Fabric Watch support in Access Gateway mode
Both the Advanced Performance Monitoring (APM) license and the Fabric Watch license must be
installed on the platform configured in Access Gateway (AG) mode to use the frame monitoring and
end-to-end (EE) monitoring capabilities. The APM license provides the counters and the Fabric
Watch license provides the monitoring and alert mechanisms for these counters. See
“Setting the
high threshold of the RX area of an EE monitor” on page 48 for configuration information.
The following classes are not supported in Access Gateway mode:
• Fabric
• Security
• E_Port (Port subclass)
• VE_Port (Port subclass)