Dell POWEREDGE M1000E - Manual (Page 70)

50 Fabric Watch Administrator’s Guide
53-1002752-01
thConfig command
6
Specifying the 16 Gbps SFP type
You can use the sfpType operand to manage the actions and thresholds for the Current, Voltage,
RXP, TXP, and Temperature areas of the 16 Gbps SFPs. If you do not provide the SFP type
parameters, the existing thresholds and actions of the SFP class are changed to the default. SFP
types for the 10 Gbps SFPs and 16 Gbps SFPs and QSFPs are listed in
Table 13 .
switch:admin> thconfig
--
set sfp -area TXP
--
sfptype sfptype
switch:admin> thconfig
--
apply sfp -area TXP
--
sfptype sfptype
TABLE 13 16 Gbps and QSFP configurable SFP types
SfpType Serial number Area Default Value
16GSWL HA High Low
Temperature (Centigrade) 85 -5
Voltage (mVoltage) 3600 3000
RXP (uW) 1259 32
TXP (uW) 1259 126
Current (mAmp) 12 3
Power on Hours (hours) 0 0
16GLWL HB Temperature (Centigrade) 90 -5
Voltage (mVoltage) 3600 3000
RXP (uW) 1995 10
TXP (uW) 1995 126
Current (mAmp) 70 1
QSFP HT Temperature (Centigrade) 85 -5
Voltage (mVoltage) 3600 2970
RXP (uW) 2180 44
TXP (uW) 0 0
Current (mAmp) 10 1
10GSWL KA Temperature (Centigrade) 90 -5
Voltage (mVoltage) 3600 3000
RXP (uW) 1999 30
TXP (uW) 1999 125
Current (mAmp) 10 3
10GLWL KD Temperature (Centigrade) 90 -5
Voltage (mVoltage) 3600 2970
RXP (uW) 2230 14
TXP (uW) 2230 60
Current (mAmp) 95 10