Dell POWEREDGE M1000E - Manual (Page 97)

Fabric Watch Administrator’s Guide 77
53-1002752-01
Resource class settings
8
Resource class settings
The Resource class monitors flash memory. It calculates the amount of flash space consumed and
compares it to a defined threshold.
Resource class area
Table 25 describes the Fabric Watch Resource class area. Configure the Resource class using the
sysMonitor command.
Resource class setting guidelines
Use the Resource Class default settings listed in Table 26 .
Resource class default settings
Table 26 provides default settings for areas in the Resource class.
Brocade 8000
Low: 0
High: 73
Buffer: 10
Brocade DCX
Low: 0
High: 70
Buffer: 10
Brocade DCX-4S
Low: 0
High: 75
Buffer: 10 Below: 3
Above: 3 Informative
Out-of-range
TABLE 24 Environment class default settings (Continued)
Area Description Default threshold
settings Default alarm settings Threshold state
TABLE 25 Resource class area
Area Description
Flash Monitors the compact flash space available by calculating the percentage of flash space
consumed and comparing it with the configured high threshold value.
TABLE 26 Resource class default settings
Flash Monitors the
percentage of
compact flash used Unit: Percentage (%)
Time base: none
Low: 0
High: 90
Buffer: 0 Below: 3
Above: 3 Informative
Informative
Out_of_range
In_range