Dell PowerEdge M600 - Manual (Page 128)

128
Installing Blade Components
Figure 3-15. Installing a NIC Hardware Key
Processors
NOTE:
The following removal and installation procedures apply to the PowerEdge
M905, M805, M605, and M600 blades. Appropriate illustrations are provided for
each type of processor.
Processor Installation Guidelines
PowerEdge 905 Systems
• The PowerEdge 905 supports dual-core or quad-core AMD™ Opteron™
8xxxx Series processors only.
• Four processors must be installed; dual-processor configurations are not
supported
• Only AMD 8xxxx MP series processors are supported.
1 NIC hardware key 2 connector on system board
1
2