Dell PowerEdge M600 - Manual (Page 80)

80
Using the System Setup Program
NOTE:
After installing a memory upgrade, it is normal for your system to send a
message the first time you start your system.
Using the System Setup Program
Table 2-1 lists the keys that you use to view or change information on the
System Setup program screens and to exit the program.
NOTE:
For most of the options, any changes that you make are recorded but do not
take effect until you restart the system.
System Setup Options
Main Screen
When you enter the System Setup program, the main System Setup program
screen appears (see Figure 2-1).
Table 2-1. System Setup Program Navigation Keys
Keys Action
Up arrow or Moves to the previous field.
Down arrow or Moves to the next field.
Spacebar, <+>, < – >, left and
right arrows
Cycles through the settings in a field. In some
fields, you can also type the appropriate value.
Exits the System Setup program and restarts the
system if any changes were made.
Displays the System Setup program ' s help file.