Dell PowerEdge M600 - Manual (Page 143)

Installing Blade Components
143
Figure 3-24. Installing a Hard Drive (Half-Height Blade Shown)
2 Insert the hard-drive carrier into the drive bay.
3 Close the hard-drive carrier handle to lock it in place.
Removing a Hard Drive
NOTICE:
Not all operating systems support hot-plug drive installation. See the
documentation supplied with your operating system.
1 Take the hard drive offline and wait until the hard-drive indicator codes on
the drive carrier signal that the drive may be removed safely. See
Figure 1-8.
When all indicators are off, the drive is ready for removal.
1 hard drive carrier 2 hard drive bay 0
3 hard drive bay 1 4 carrier handle
3
2 1
4