Dell PowerEdge M600 - Manual (Page 39)

About Your System
39
The CMC provides multiple systems management functions for your
modular server:
• Enclosure-level real-time automatic power and thermal management.
– The CMC monitors system power requirements and supports the
optional Dynamic Power Supply Engagement mode so that the CMC
can enable or place power supplies in standby dynamically depending
on load and redundancy requirements to improve power efficiency.
– The CMC reports real-time power consumption, which includes
logging high and low points with a time stamp.
Table 1-10. CMC Module Features
Indicator Pattern Description
Network
interface
controller link
indicator Off LAN is not linked.
Green LAN is linked.
Network
interface
controller
activity
indicator Off LAN is not active.
Amber
blinking Indicates that the system CMC and the LAN
are communicating.
Power indicator Off CMC does not have power.
Green CMC has power.
Green
blinking Firmware update in progress
Status/
identification
indicator Off This CMC is the standby CMC.
Blue (solid) This CMC is the primary CMC.
Blue
(blinking) The CMC is being identified by the systems
management software.
Fault indicator Off The CMC is operating normally.
Amber
blinking A fault has occurred.
Serial
connector None Used for local configuration (115200 baud,
No parity, 8, 1)