Dell 5110cn Color Laser Printer - Manual (Page 50)

To configure the detailed settings for the IP Filter used for LPD and Port9100. This page can be linked from
LPD and Port9100 settings on the TCP/IP page.
Values:
Address Sets the address in the address field. Enter a numeric value between 0 and 255 in
each field of "aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to
"aaa."
Address Mask Sets the Address Mask in the Mask field. Enter a numeric value between 0 and 255
in each field.
Active
Mode Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
Reject Rejects printing from specified network address.
When you make the settings for the filter, enter the IP address of the IP Filter in the Address field and the
Subnet Mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is
appended to the current value.
Setup Procedure
You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first
before proceeding to the next longer address when setting multiple filters.
The following section explains how the IP Filter operates.
IP Filter Procedure
Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the "192.168.100.10" IP address.
Procedures:
Click the first column of Access List row 1. 1.
Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field. 2.
Select Permit. 3.
Click Apply New Settings. 4.
Disabling Printing From a Specified User