Dell 5110cn Color Laser Printer - Manual (Page 405)

MxNmm
Feed paper from the tray loaded with MxNmm defined by users
Possible range specified:
Width: 88.9 to 220 mm
Length: 139.7 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users
Possible range specified:
Width: 3.50 to 8.50 inches
Length: 5.50 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing.
In some cases, this option will be ignored.
-r
Rotates the image by 90o and uses the paper in the landscape orientation.
-n
Disables the addition of the showpage. It is used when files converted to the PostScript language
program are merged with files created with other applications.
-l=left,bottom
Specifies the print position. Printing will be executed from the left and bottom of the page. The default
is 0.25 inches for both left and bottom.
-s=width,height
Specifies the output size. Printing will be executed with the width and height in inches.
-S=width
Sets the width of the output size in inches. The height will be calculated automatically according to the
width.
-E
This function turns on the image enhancement function. In some cases, this option will be ignored.
-Nc=copies