Dell 5110cn Color Laser Printer - Manual (Page 49)

To configure the detailed settings of SNMP.
Values:
Community Name
(Read only)
*1
Specifies the community name to access (read only) the data up to 31 alphanumeric
characters.
The original setting will remain valid if no input is made. Characters entered for
community Name in previous settings will not be displayed on the screen. The default
Read Community is public.
Community Name
(Read/Write)
*1
Specifies the community name to access (read and write) the data up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered for
community Name in previous settings will not be displayed on the screen. The default
Read/Write Community is private.
Community Name
(Trap)
*1
Specifies the community name used for trap up to 31 alphanumeric characters.
The original settings will remain valid if no input is made. Characters entered for
Community Name (Trap) in previous settings will not be displayed on the screen. The
default Trap Community is " " (NULL).
Trap Notification
1-4 Select the check boxes to notify trap occurrence. In this case, specify the IP address
and IP socket in the following format:
· IPv4
Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each
section of "nnn" is a variable value between 0 and 255. Note that values 127 and
224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable
value between 0 and 65535.
· IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of "xxxx"
is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable
value between 0 and 65535.
· IPX
Specify the IPX address in the nnnnnnnn.mmmmmmmmmmmm.llll format. IP
network nnnnnnnn is a hexadecimal variable value between 0 and ffffffff, IPX node
mmmmmmmmmmmm is a hexadecimal value between 0 and ffffffffffff and IPX
socket llll is a hexadecimal variable value between 0 and ffff.
Authenticate
Error Trap Select the check box to notify Authenticate Error Trap.
*1 The default value of each items can be changed by using Dell Printer Configuration Web Tool.
*2 An optional multi protocol card is required to use.
IP Filter (IPv4)
Purpose: