Dell 5110cn Color Laser Printer - Manual (Page 322)

Entering Values
Using the operator panel, enter the values that you found in the color registration chart to make
adjustments.
Press Menu . 1.
Press until Maintenance appears, and then press or . 2.
Press until Color Reg Adj appears, and then press or . 3.
Press until Enter Number appears, and then press or .
The cursor is located at the first digit of the Enter Number .
4.
Press until you reach the value (for example, +3 ) displayed on the chart. 5.
Press once and move the cursor to the next value. 6.
Repeat steps 6 and 7 to enter all of the digits of the Enter Number , and then press . 7.
Press until Color Reji Chart appears, and then press .
The color registration chart is printed with the new values.
8.
Color registration adjustment is complete when the straightest Y (yellow), M (magenta), and C (cyan)
lines are next to the 0 line. 9.
CAUTION: After printing the color registration chart, do not turn off the printer until the
printer motor has stopped running.
NOTE: If 0 is not next to the straightest lines, determine the values and adjust the printer again.