Dell POWEREDGE R805 - Manual (Page 45)

Figure 3-22. Removing and Installing the Optical Drive Tray
Figure 3-23. Cabling the Optical Drive
1 optical drive 2 optical-drive interface cable
3 power cable 4 optical-drive release tab
5 optical-drive tray
Removing the Optical Drive From the Optical Drive Tray
Pull outward on the tab at the back of the carrier on the left side and simultaneously pull up on the left side of the optical drive to separate the drive from the
tray. See
Figure 3 -24 .
Figure 3-24. Removing and Installing the Optical Drive in the Optical Drive Carrier
1 SATA connector (SATA_A) on system board 2 SATA interface cable
3 routing tabs in chassis side wall 4 optical-drive SATA connector
5 optical drive power cable 6 CD_PWR connector on backplane