Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 76)

F6 <6> <6>
F7 <7> <7>
F8 <8> <8>
F9 <9> <9>
F10 <0> <0>
F11
F12 <@> <@>
Up arrow Up arrow
Right arrow Right arrow
Left arrow Left arrow
Down arrow Down arrow
OR OR
Defragmenting a Volume Containing Persistent Images
NOTICE: Defragmenting a volume containing persistent images without using the following procedure can delete
your persistent images and degrade your system performance.
NOTE: If you do not have persistent images on your volume, this procedure does not apply.
NOTE: To defragment a volume, you must delete all persistent images on that volume.
To defragment a volume containing persistent images, perform the following steps:
1. On the NAS Manager primary menu, click Disks.
2. Click ActiveArchive.
3. Click Schedules.
4. Select a scheduled persistent image, and then click Delete.
5. Repeat until all scheduled persistent images are deleted.
6. Click Back.
7. Click Persistent Images.
8. Select a persistent image, and then click Delete.
9. Repeat until all persistent images are deleted.
10. Click Maintenance.
11. Click Terminal Services.
12. Log on to the system.
13. Click Exit to close the Advanced Administration Menu.
14. Double-click My Appliance.
15. Right-click the drive you are going to defragment.
16. Click Properties.
17. Click Tools.