Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 20)

The NAS Manager allows you to list available disks, rescan for a disk, and view disk properties.
NOTE: You cannot hot swap hard drives on the Dell PowerVault 715N NAS Appliance. You must turn off the system
before removing or inserting a hard drive. For information about removing and inserting a hard drive, see
"Installing Hard Drives" in the Installation and Troubleshooting Guide.
Listing Available Disks
1. On the NAS Manager primary menu, click Disks.
2. On the Disks page, click Disks.
The Disks page displays a list of the available disks and shows their status.
Rescanning for Disks
1. On the NAS Manager primary menu, select Disks.
2. On the Disks page, select Disks.
3. In the Physical Disks column on the Disks page, select the disk to rescan.
4. In the Tasks list, click Rescan....
5. On the Rescan page, click OK to start the rescan.
Back to Contents Page