Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 67)

4. Click Registered User or Guest, and then click OK.
5. Select the Microsoft UAM Volume, and then click OK.
6. Close the Chooser dialog box.
To install the authentication files on the Macintosh workstation, perform the following steps:
1. Double-click the Microsoft UAM Volume on the Macintosh desktop.
2. Double-click the Microsoft UAM Installer file on the Microsoft UAM volume.
3. Click Continue in the Installer Welcome screen.
The installer reports whether the installation succeeded.
If the installation succeeded, Macintosh users of this workstation are offered Microsoft Authentication when they connect
to the system.
Adapter Bindings
FSM can bind to only one network adapter. By default, it is bound to the embedded 10/100TX Network Adapter. To
change the binding in systems with multiple network adapters, the AppleTalk Protocol Properties for the network adapter
to be used by AppleTalk must be modified to accept inbound connections.
AppleTalk Protocol Adapter Binding
To modify the AppleTalk protocol adapter binding for Filers with multiple network adapters, perform the following steps
from the NAS Manager:
1. On the NAS Manager primary menu, click Maintenance.
2. Click Interfaces.
3. Click the radio button next to the adapter you want to use for the AppleTalk protocol.
4. On the Tasks menu, click AppleTalk.
5. Click the check box next to Enable inbound AppleTalk connections on this adapter.
6. Optionally, if you use AppleTalk zones, select the appropriate zone in the drop-down box.
7. Click OK.
Services for NetWare
Services for NetWare (SFN) are compatible with Novell NetWare Bindery service for authentication and file access using
the internetwork packet exchange/sequenced packet exchange (IPX/SPX) network protocol.
Configuring the NWLink IPX/SPX Compatible Protocol
To configure this protocol, you need the internal network number, the frame type, and the network number.
Internal Network Number
Internal network numbers are used for internal routing and are generally only needed for servers. You should not need to
change this option on your system.
Frame Type and Network Number
Frame types define the packet formats that are used by different networks. It is important that all systems in a network