Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 42)

24. Click Finish to initiate the restore process
25. Restart your system after the restore process completes.
NOTE: Windows must replace all locked files on the system; therefore, the restart system process might take
approximately 15 minutes to complete.
Supported Backup Software
To back up your volumes, you can use direct-attached local backup or network backup.
Direct-Attached Local Backups
The following software is supported for direct-attached local backups.
Windows 2000 Backup and Recovery Tools
VERITAS® Backup Exec® 8.5 and 8.6 for Windows NT® and Windows 2000
Network Backups
The following software is supported for network backups.
VERITAS® Backup Exec® 8.5 and 8.6 for Windows NT® and Windows 2000
Computer Associates® ARCserveIT™
ARCserveIT 2000 for Windows NT and Windows 2000
ARCserveIT 6.61 for Red Hat Linux 7.0
Using Backup Software
The following software is supported for making your backups.
Windows 2000 Backup and Recovery Tools
Windows 2000 backup and recovery tools allow you to back up your data volumes to a locally attached tape drive or a
file.
NOTE: You must have a supported SCSI card installed and a tape drive to back up your data volumes to tape.
You can access the Windows 2000 backup and recovery tools by clicking the Maintenance tab on the NAS Manager
primary menu and clicking Backup or by clicking Windows 2000 Backup/Recovery Tools on the Advanced
Administration Menu under Administrative Tools.
For more information about the Windows 2000 backup and recovery tools, see the Windows Powered Help. You can
access Windows Powered Help by clicking Windows Powered Help in the Advanced Administration Menu under
Administrative Tools or by clicking Help in the Start Menu when using the Terminal Services Client.
Using the VERITAS Backup Exec
The following information explains how to install and use the VERITAS Backup Exec software for local backups.
Installing VERITAS Backup Exec