Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 59)

2. On the NAS Manager primary menu, click the Maintenance tab.
3. Click Terminal Services to create a Terminal Services Advanced Client session with the NAS appliance.
4. Log on to the system as an administrator.
5. On the Advanced Administration Menu, click System Management, and then click Set Regional Options to
launch the Regional Options control panel.
6. On the General tab, select the MUI language from the Your locale (location) drop-down menu, and then click
Apply.
7. Log off and log on to the system again for the new language MUI to take effect.
Installing and Configuring Support for Other Languages
NOTE: Only install additional language locales if your preferred language is not available with MUI support or you
need additional locale support.
The Windows Powered operating system that comes installed in the PowerVault 715N can be configured to support the
ability to read and write documents in a number of languages. To install the software required to support a specific
language, perform the following steps:
1. In Windows Explorer on a remote system, right-click the CD drive, and then click Sharing. In Sharing tab on the
Compact Disk Properties page, click the radio button next to Share this folder to share the CD drive, and then
insert the Multilingual Support CD that came with the PowerVault 715N into your remote system CD drive.
2. From the remote system, connect to the NAS Manager.
3. On the NAS Manager primary menu, click the Maintenance tab, and then click Terminal Services to create a
Terminal Services Advanced Client session with the NAS appliance.
4. Log on to the system as administrator.
5. Close the Advanced Administration Menu by clicking Exit.
6. Double-click My Appliance on the NAS desktop.
7. If this is a new system from Dell, perform the following procedure, and then go to step 9. Otherwise, go to step 8.
a. Double-click Control Panel.
b. Double-click Regional Options.
8. If you performed the reinstallation procedure on your system, perform the following procedure.
a. In Windows Explorer on a remote client system, right-click the CD drive, and then click Sharing.
b. In Sharing tab on the Compact Disk Properties page, click the radio button next to Share this folder to
share the CD drive, and then insert the Multilingual Support CD that came with your NAS appliance into your
remote client system CD drive.
c. Map a network drive to the CD share, but do not select Reconnect at logon.
d. Browse to the mapped drive, and then double-click the Multilingual Support CD to launch the Multilingual
Support CD's Web interface.
e. Click the Install Language Locales Not Supported by MUI link to launch the Regional Options control
panel.
9. From the Language Settings for the System panel, select the languages to be configured.
10. Set the default language for the system by clicking Select default..., and then selecting the appropriate language
from the menu. Click OK.
11. Click Apply to complete the operation.
12. If an Insert Disk window appears, you must perform the following steps: