Canon COLORPASS-Z6000 PS-NX6000 - Manual (Page 63)

4-17
4
Removing and replacing boards
Removing and replacing boards
This section includes procedures for removing and replacing the following boards:
• Copier interface board
• User interface board
• Motherboard
For information on installing option boards, see the separate installation instructions
provided with those boards.
Copier interface board
The copier interface board (see Figure 4-10) provides the print interface between the
ColorPASS and the copier.
The copier interface board is installed in connector PCI2 on the motherboard and
occupies one back panel slot. The interface connector at slot 3 on the back panel
connects to a cable that attaches to the copier.
F IGURE 4-10 Copier interface board
To connector PCI2 on
the motherboard
Copier interface
connector