Canon COLORPASS-Z6000 PS-NX6000 - Manual (Page 32)

3-4
3
Connecting the ColorPASS
Verifying the connection
After you connect the ColorPASS to the copier, print the Test Page and the
Configuration page to verify that the connection between the ColorPASS and the copier
is good.
Printing the Test Page and Configuration page
Before connecting the ColorPASS to the network, print the Test Page and the
Configuration page.
• Test Page—printing the Test Page verifies that all the components of the
ColorPASS-to-copier interface are working. The Test Page is a color file that resides on
the HDD (hard disk drive).
• Configuration page—printing the Configuration page can be helpful during
installation, setup, and service. After you install the ColorPASS and before any default
settings are changed, you can obtain a record of the defaults by printing the
Configuration page.
After you make the physical connection to the network, the network administrator can
customize Setup options according to the network and user environment. Using the
Configuration page as a guide helps speed up this process. For more information, see
the Configuration Guide.
Before you perform any service procedure, print the Configuration page, if possible, so
that you can return the settings to their former configuration, if necessary.