Canon COLORPASS-Z6000 PS-NX6000 - Manual (Page 31)

3-3
3
Connecting to the copier
Connecting to the copier
After completing the preliminary checkout, connect the ColorPASS to the copier. The
ColorPASS communicates with the copier through a cable from the ColorPASS copier
interface board to the interface port on the copier.
T O CONNECT TO THE COPIER
1. Power off the copier.
Check with the network administrator or supervisor before powering off the copier.
2. Connect one end of the copier interface cable to the interface connector on the copier
and the other end to the copier interface connector on the back of the ColorPASS.
F IGURE 3-4 Copier interface cable connection
Copier interface cable