Acronis True Image for MS SBS Server - User Guide User Manual

Page 150

/harddisk:[disk number]

Specifies the hard disks to convert by numbers. For each disk, a

separate virtual disk will be created.
By specifying

/harddisk:DYN

you will convert all dynamic volumes that present in the system.

/vm_type:[vmware|esx|Micro
soft|parallels]

The type of the virtual machine to which the virtual disk will be

added.

/ur

Use when converting image of a disk, containing Windows, and the

resulting virtual disk is supposed to be bootable. With this key, the
program will add drivers, necessary for the virtual machine type
selected with

/vm_type

key, to the resulting virtual disk. If the

image was taken from a virtual machine of the same type, normally

the key is not needed.
Drivers for the virtual machine reside in the storage, defined by the

registry key

HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\UniversalRestore\Drive

rsPackPath. In case the storage has been moved, please change the
key or use the command

/ur_path:[path].

/ur_path:[path]

The same as

/ur

with custom path to the virtual machine drivers

storage.

list

/filename:[file_name]

With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide

with those in the drives/partitions list, if the image does not contain

all the disk partitions. For example, if the image contains partitions

2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the

deploy /partition

command cannot find a partition in the

image by its physical number, use

/partition:

image> /target_partition:

partition>

keys. For the above example, to restore partition 2-5

to its original place use:

/partition:2-2 /target partition:2-5

explore

/partition:[partition
number]

Specifies a list of partitions to be mounted as virtual drives. Without

this option, all partitions stored in the image will be mounted.
To obtain the partition number for this option, list the image
contents with the

/list/filename

command an use the number

from the Idx column.

/letter

Assigns letters to the mounted drives. This option is used with

/partition

option only.

unplug

/letter:X

Specifies the virtual drive to be disconnected by letter.

/letter:all

Disconnects all virtual drives.

asz_create

/password:[password]

Sets a password for the Acronis Secure Zone.