Acronis Backup Advanced for vCloud - Administrator's Guide - Manual (Page 46)

46 Copyright © Acronis International GmbH, 2002-2014
Setting up the recovery
1. On the organization tab, select the machine that you want to recover, and then click Recover.
2. In Recovery point, select the date and time to which the machine will be recovered. By default,
the latest recovery point will be used.
If the vApp no longer has one or more networks that were used by the backed-up machine, you
are prompted to map the network adapters of the virtual machine to the networks of the vApp.
3. [Optional] Select the Power on the virtual machine after recovery check box.
4. Click OK.
Monitoring the recovery progress
When the recovery starts, the machine will have the Recovering protection status. The progress of
recovery is shown in the machine details area on the right.
If you need to stop the recovery, click the Stop recovery button or the stop button ( ) near the
progress bar. The original machine will likely become corrupted.
After the recovery is completed, the information about its success or failure is shown in the machine
details area.
2.4.5 Recovering a virtual machine
This is a common recovery procedure. Unlike overwriting an existing virtual machine, this enables you
to recover a deleted virtual machine, create a new virtual machine by recovering it from a backup,
and change the machine's network settings.