HP LaserJet 3015 - Manual (Page 43)

Printing on transparencies and labels
Use only transparencies and labels that are recommended for use in laser printers, such as
HP transparency film and HP laser-quality labels. See
Device media specifications for more
information.
CAUTION Inspect the media to make sure that it is not wrinkled or curled and that it does not have any
torn edges or missing labels. Do not send the labels through the device more than once. The
adhesive can damage the device.
To print on transparencies or labels
CAUTION Be sure to set the correct media type in the device settings (printer driver) as instructed in the
following procedure. The device adjusts the fuser temperature according to the media type
setting. When printing on special media such as transparencies or labels, this adjustment
prevents the fuser from damaging the media as it passes through the device.
1. Load a single page in the priority input slot or load multiple pages in the media input tray.
Make sure that the top of the media is forward and the side to be printed on (the rough
side of transparencies) is facing up.
2. Adjust the media guides.
ENWW Printing on transparencies and labels 33