Wrong original was copied, Too light or dark, Unwanted lines – HP LaserJet 3015 User Manual
Page 115: Black dots or streaks, Unclear text, Reduced size
Wrong original was copied
●
Make sure that the automatic document feeder (ADF) is empty.
Too light or dark
●
Try adjusting the settings.
●
Make sure that the copy-quality settings are correct. See
for
more information.
Unwanted lines
●
Make sure that the priority input slot is in place.
●
Try cleaning the scanner glass. See
Cleaning the outside of the device
for instructions.
●
The photosensitive drum inside the print cartridge might be scratched. Install a new HP
print cartridge. See the start guide for instructions.
Black dots or streaks
●
Ink, glue, correction fluid, or another unwanted substance might be on the automatic
document feeder (ADF). Try cleaning the device. See
Cleaning the outside of the device
for instructions.
Unclear text
●
Try adjusting the settings.
●
Make sure that the copy-quality settings are correct. See
for
more information.
●
See the device software Help for more information about changing the settings.
Reduced size
●
The software settings might be set to reduce the scanned image.
●
See the device software Help for more information about changing the settings.
ENWW
Copy defects are apparent
105