Loose toner, Vertical repetitive defects, Loose toner vertical repetitive defects – HP LaserJet 3015 User Manual

Page 102

Loose toner

●

Select Type is: on the Paper tab or the Paper/Quality tab of the printer driver, and select
the media that you are using. See

Optimizing print quality for media types

for instructions.

This feature is also available in the HP toolbox.

●

Clean the inside of the device. See

Cleaning and maintenance

for instructions.

●

Check the media type and quality. See

Device media specifications

for more information.

●

Try installing a new HP print cartridge. See the start guide for instructions.

●

Plug the device directly into an alternating current (AC) outlet instead of into a power strip.

Vertical repetitive defects

●

The print cartridge might be damaged. If a repetitive mark occurs at the same spot on the
page, install a new HP print cartridge. See the start guide for instructions.

●

The internal parts might have toner on them. See

Cleaning and maintenance

for more

information. If the defects occur on the back of the page, the problem will probably correct
itself after a few more pages are printed.

●

Select Type is: on the Paper tab or the Paper/Quality tab of the printer driver, and select
the media that you are using. See

Optimizing print quality for media types

for more

information. This feature is also available in the HP toolbox.

Chapter 8 Troubleshooting

ENWW