HP LaserJet 3015 User Manual

Page 25

●

The phone line sounds for outgoing faxes.

●

The ring volume for incoming faxes.

To change the alarm volume

The alarm sounds when the device is presenting an alert or critical error message. The alarm
duration length is either one or three seconds, depending on the type of error.

1. Press

ENTER

2. Use the

or the

button to select Common settings, and then press

ENTER

3. Use the

or the

button to select Volume settings, and then press

ENTER

4. Press

ENTER

to select Alarm volume.

5. Use the

or the

button to select Off, Soft, Medium, or Loud.

6. Press

ENTER

to save your selection.

Note

The factory-set default for the alarm volume is Soft.

To change the volume for the fax

This setting determines the volume of various fax sounds that occur when the device is
sending or receiving fax jobs.

1. Press

ENTER

2. Use the

or the

button to select Common settings, and then press

ENTER

3. Use the

or the

button to select Volume settings, and then press

ENTER

4. Use the

or the

button to select PhoneLine Volume, and then press

ENTER

5. Use the

or the

button to select Off, Soft, Medium, or Loud.

6. Press

ENTER

to save your selection.

Note

The factory-set default is Soft.

To change the ring volume of the fax

The fax ring sounds when the device is initially sending or receiving a call. The ring duration
length depends on the local telecom ring-pattern length.

1. Press

ENTER

2. Use the

or the

button to select Common settings, and then press

ENTER

3. Use the

or the

button to select Volume settings, and then press

ENTER

4. Press the

or the

button once to select Ring volume, and then press

ENTER

5. Use the

or the

button to select Off, Soft, Medium, or Loud.

6. Press

ENTER

to save your selection.

Note

The factory-set default is Soft.

ENWW

Using the device control panel