HP LaserJet 3015 - Manual (Page 33)

Optimizing print quality for media types
Media type settings control the temperature of the device fuser. You can change the settings
for the print media that you are using to optimize the print quality. The following are the media
types that you can optimize for:
● plain paper
● preprinted paper
● prepunched paper
● letterhead
● transparency
● labels
● bond paper
● recycled paper
● color paper
● light paper (less than 75 g/m 2 or 20 lb)
● heavy paper (90 to 105 g/m 2 or 24 to 28 lb)
● card stock (105 to 176 g/m 2 or 28 to 47 lb)
● envelope
● rough paper
To gain access to the optimizing feature
You can gain access to the optimizing feature on the Paper tab or the Paper/Quality tab in
the device properties (printer driver). For more information, see
Changing print settings .
Note Printing speeds might vary depending on the type and size of media used.
You might need to change the setting again to optimize for the type of media on which you
normally print.
ENWW Optimizing print quality for media types 23