Bio-Rad iMark Microplate Absorbance Reader - Manual (Page 37)

iMark Microplate Absorbance Reader Instruction Manual
31
c. Recall STD Curve Setting
Recall Setting of Standard Curve
In this screen, there are two items for setting the Recall STD curve as below.
The Up and Down arrow keys move the cursor to the desired item in the menu list.
1. Recall setting (Yes/No)
2. Selecting the storage number of standard curves (1 -> 5)
Recall Setting
Move the cursor to the desired position using the Up, Down or
Right arrow keys. Enter key accepts the setting and returns the
user to the standard menu screen.
Yes: Recalling of the standard curve is active.
No: Recalling of the standard curve is inactive.
Storage Number Selection
Five memories are selectable. The vacant memory (marked with
asterisks on the date and time field) is also selectable. It is
necessary to save a standard curve before using its protocol.
Move the cursor to the desired position using the Up and Down
keys.
This setting screen consists of two parts. The Right arrow key is
used to switch the indication field between the date and time to the
standard curve name.
Move the cursor to the desired position using the Up and Down
keys. The Enter key accepts the storage number and returns to the
standard menu screen.
NOTE:
If the recall of standard curve is active (the recall setting
is “Yes”), the standard information setting and the curve fit setting
will be invalidated and their setting screens will not open.
Recall STD curve
»
■Recall setting
•Select STD curve
Recall setting
» ■Yes No
Recall setting
Select STD Curve
»
■1:16/03/04 11:25
2:******** *****
↓ 3:15/03/04 10:30
Select STD Curve
↑»■4:******** *****
5:******** *****
Select STD Curve
»
■1: STD Curve #1
2: STD Curve #2
↓ 3: STD Curve #3
Select STD Curve
↑»■4: STD Curve #4
5: STD Curve #5
Select STD curve
Right arrow key