Bio-Rad iMark Microplate Absorbance Reader - Manual (Page 21)

iMark Microplate Absorbance Reader Instruction Manual
15
Kinetic Protocol Reports
Four types of Kinetic protocol reports can be generated: absorbance, kinetic plots, linear regression, and GALT
reports.
1. Absorbance Report
The Kinetic Absorbance report is the series of absorbance data in the kinetic sequence.
2. Kinetic Plots Report
The Kinetic plots are the absorbance plots of each well in the plate. It is available for readers with the optional
internal printer or with an external ESC/P printer which accepts ESC/P code.
3. Linear Regression Report
The Linear Regression report provides the calculation of Kinetic reaction rate for each well using the linear
regression.
4. GALT Report
The GALT report calculates the following formula for each well between two readings of a plate.
GALT = (R2 – R1) * k
Where: R1 = Absorbance value of 1st reading
R2 = Absorbance value of 2nd reading
k = GALT factor